Needs water for most washers include threaded valves on hot and cold water pipes. This air cushion absorbs the water pressure that occurs when the intake valve closes suddenly. This action prevents the absorption of a “water hammer” and possible damage to the water inlet valve.

Most automatic washing machines require a “container of water is known to provide a vacuum break for the supply of incoming water. The water from the hose passes through a nozzle at the top of the container, and is connected to the suction pipe at the bottom. Problems with leaks’ water taps may also occur because the water pressure is used to close the supply of lava valves.A convenient way to check the water pressure is a gauge pressure of water. Check the pressure when filling the washing machine to get a stable flow dynamics.

For best cleaning results, the water heater should provide water to the washer 140 to 160F. Most water heaters have a thermostat on the radiator or behind a cover plate. When adjusting the temperature of the hot water heater, keep in mind the loss of heat through water pipes. For example, a water heater to 140F and located 30 meters from the washing machine will not provide the water temperature to 110 f washer. Insulating exposed water line between the heater and the washer prevents most of the loss of temperature. The hot water tank can produce excessive temperatures in other parts of the house. drainage systems: washing water outlet pipe installation can be a laundry, fire hydrant, or a floor drain. For example, a high water, a 14-lb washer automatic use about 18 gallons in the cycle of washing machine. The use of 18-lb model about 25 liters of water at a high level of water placed in the cycle of washing machine. Fix the pipe with hooks, and take care to avoid bending the pipe washing can limit drainage.